| |
 |
|
| |
|
|
| |
|
|
Chipidea推出三款先進DC/DC轉換器內核(英文內容)
(技術新聞, 2006年4月3日)
|
Chipidea has introduced three its advanced DC/DC converter cores for high-volume integrated circuit designs targeted for the consumer electronics market. The three low-power IP cores improve performance and time-to-market results even for companies that have in-house power management design skills. The cores are suitable for designers of ASICs or System-on-Chip (SoC) solutions using TSMC and TSMC-like foundry technologies at 0.18um, 0.13um, and 90nm design rules.
Chipidea CI2512 Step Down DC/DC Converter is a state-of-the-art core designed to minimize silicon real estate with a die area of 1.1mm2. The new core is up to 30 percent smaller than Chipidea𠏋 previous generation of DC/DC converters.
Chipidea𠏋 CI2513 Step Up DC/DC converter core offers leading-edge performance for MP3 players, PDAs and other applications that use single-cell Ni-MH and alkaline batteries. It also consumes a minimal die area of 1.6mm2. With a no load power consumption of 250uA, this converter supports input voltage as low as 0.8V. For applications such as smart phones and media players, Chipidea𠏋 CI2514 H-Bridge Converter offers advanced control techniques that enable power conversion from any source voltage to any target voltage.
All of Chipidea𠏋 DC/DC converter cores are enhanced with fast IP delivery and are backed with good silicon results. The IP cores are suitable for integrated device manufacturers (IDMs) or vendors of Application-Specific Integrated Circuits (ASICs), Application-Specific Standard Products (ASSPs), fabless ICs and semiconductor IP. The IP is also intended for design centers focused on providing turnkey solutions to the semiconductor industry.
http://www.chipidea.com/website/products/ip/info.do?id=10900
|
| |
|
| |
| |
|
|
| |
| |
|
|
|
